GP

gronedwaffel/ps-neighborhood

开发工具

本页由 AI 翻译,技术细节请以原文为准。 查看原文

21 stars 2 forks 质量 63 趋势 24GPL-3.0

PS4/PS5 Windows工作台:内存扫描、MCP、Ghidra RAM导出、FTP、PKG安装、主机控制和存档。测试了PS4 10.01 / PS5 13.60。

概览

精确目标:11.00、11.20、11.60、12.00、12.02、12.20、12.40、12.60、12.70、13.00、13.20、13.40、13.42、13.60。11.40及低于11.00的固件不包括在内。早期的硬件验证仍限于范围;并非所有功能都测试在每个配置文件上。 原生 PKG 安装、补丁移除、解密保存操作和 ShadowMount 批处理注册保留了仅 13.60 的 ABI 检查。内存/FTP/ELF 加载和发现的控制台服务能力可以通过兼容的 PS5Debug-NG 负载在上述目标上测试。 .解压Windows的ZIP并运行。同一个下载中包含了PS4支持。 正在开发一个 PS5 端桥接器,使控制台操作无需 Windows 应用即可正常运行。PC 伴侣预览版 v0.14.0 已被撤回。主机直达版本尚未发布;现有桌面和 MCP 工作流程请使用 v0.13.0。预览架构与验证。 将 PS Neighborhood 连接到 PS5Debug-NG,启用,进入故事模式,然后运行。

概述(AI 翻译)

附言:邻里网络 — 开发中****下载Windows应用 ·YouTube构建器 ·负载

统一PS5 11.00–13.60版本。 精确目标:11.00、11.20、11.60、12.00、12.02、12.20、12.40、12.60、12.70、13.00、13.20、13.40、13.42、13.60。11.40及以下固件不包括。早期硬件验证仍有范围;并非所有功能都会在每个配置文件上测试。

原生 PKG 安装、补丁移除、解密保存操作和 ShadowMount 批处理注册保留了仅 13.60 的 ABI 检查。内存/FTP/ELF 加载和发现的控制台服务能力可以通过兼容的 PS5Debug-NG 负载在上述目标上测试。

附言 邻里

下载Windows版本 — v0.13.0。解压Windows压缩包并运行启动PS5 Neighborhood.cmd或启动ShadowMount.cmd。同一个下载中包含了PS4支持。

网站: 正在开发一个 PS5 侧桥接器,以便控制台操作无需 Windows 应用即可正常运行。PC 伴侣预览版 v0.14.0 已被撤回。主机直达版本尚未发布;现有桌面和 MCP 工作流程请使用 v0.13.0。预览架构与验证。

本页由 AI 翻译,技术细节请以原文为准。

README

以下为原文 README 节选,完整内容请查看原文。

PS Neighborhood Web — in development · Download the Windows app · YouTube builder · Payloads

Unified PS5 11.00–13.60 release. Exact targets: 11.00, 11.20, 11.60, 12.00, 12.02, 12.20, 12.40, 12.60, 12.70, 13.00, 13.20, 13.40, 13.42, 13.60. 11.40 and firmware below 11.00 are excluded. Earlier hardware validation remains scoped; not every feature is tested on every profile.

Native PKG installation, patch removal, decrypted-save operations and ShadowMount batch registration retain their 13.60-only ABI checks. Memory/FTP/ELF loading and discovered console-service capabilities can be tested on the listed targets with a compatible PS5Debug-NG payload.

PS Neighborhood

Download the Windows release — v0.13.0. Extract the Windows ZIP and run Start PS5 Neighborhood.cmd or Start ShadowMount.cmd. PS4 support is included in the same download.

Website: a PS5-side bridge is being developed so console operations can work without the Windows app. The PC-companion preview release v0.14.0 was withdrawn. The console-direct version is not released yet; use v0.13.0 for the existing desktop and MCP workflow. Preview architecture and validation.

GTA V Story Mode menu: connect PS Neighborhood to PS5Debug-NG, enable Allow MCP compare-and-write, enter Story Mode, then run GTA V In-Game Menu.cmd. Press L1 + D-pad Right to open it. It runs inside GTA and continues after closing the PC app. Supports the fingerprinted PS5 builds PPSA04263 01.000.000 and PPSA04264 01.010.002; other builds are refused. Full source, build instructions and feature details are in trainers/gta5-story.

Your PS4 / PS5 memory workbench: scanning, MCP tools, Ghidra RAM exports, FTP and payload loading, plus platform-specific package and console management.

PS Neighborhood brings console tools into one Windows desktop app. Explore a running game’s memory through PS4Debug or PS5Debug-NG, capture regions for offline analysis, build a trainer, or install a folder of local PKGs directly from your PC. An integrated Model Context Protocol server gives compatible AI clients access to the same memory workflow.

在 GitHub 查看完整 README

安装

This server does not publish a one-line install command.

Open the repository installation guide 新手?先看 mcpskill.org 教程 →